Layout
Schematic

• Board 33mm x 43mm, multilayer
• ARM7TDMI-S (LPC2138, NXP)
• 60MHz clock PLL-adjustable
• 512KB Flash (ISP), 32KB RAM
• 2x UART, 2x SPI, 2x I2C
• 8x 10Bit A/D converter
• 10Bit D/A converter
• Max. 47 parallel I/O lines
• 2x timer (32Bit), 6x PWM (resolution min. 16ns)
• RTC with independent power and own crystal
• Watchdog
• 10-pin connector for RS232 converter IF232LP
• Contact pin spacing 2.54mm
• Supply voltage 3.3V
• Weight only 11g, with battery 13g
• Temperature range -40 to +85°
• Classified UL, CE, RoHS

Layout1
Layout2
Schematic

• Board 33mm x 43mm, multilayer
• ARM7TDMI-S (LPC2194, NXP)
• 60MHz clock PLL-adjustable
• 256KB Flash (ISP), 16KB RAM
• 2x UART, 2x SPI, 1x I2C, 4x CAN
• 4x 10Bit A/D converter
• Max. 47 parallel I/O lines
• 2x timer (32Bit), 6x PWM (resolution min. 16ns)
• RTC
• Watchdog
• 10-pin connector for RS232 converter IF232LP
• Contact pin spacing 2.54mm
• Supply voltage 3.3V
• Weight only 11g
• Temperature range -40 to +85°
• Classified UL, CE, RoHS

Layout1
Layout2
Schematic

• Board 59mm x 60mm, multilayer
• ARM7TDMI (ADuC7026, Analog Devices)
• 41.78MHz clock PLL-adjustable
• 62KB Flash (ISP), 8KB RAM
• 1MByte serial Flash
• 1MByte battery-buffered RAM
• UART, SPI, I2C
• Ethernet controller W5300 plus RJ45
• 10x 12Bit A/D converter (1Megasample)
• 4x 12Bit D/A converter (10us)
• Voltage reference, comparator, temperature sensor, PLA
• Max. 13 free usable parallel I/O lines
• 2x timer 16Bit, 6x PWM
• Wake-up timer 16Bit
• RTC DS1629
• Watchdog
• 10-pin connector for RS232 converter IF232LP
• Supply Voltage 3.3V
• Current consumption typical 270mA
• Weight only 23g
• Temperature range -40 to +85°
• Classified UL, CE, RoHS

Layout1
Layout2
Schematic1
Schematic2

• Board 100mm x 80mm, multilayer
• CPU32 (MC68332 16MHz, Motorola)
• TPU (A-mask) with 16 universal timer channels, G-mask loadable
• System clock generation with PLL, 131kHz to 25MHz software-controlled
• 1MB Flash, 1MB static RAM, optionally battery-buffered
• 3x UART, 1x SPI
• CAN controller SJA1000 (Full CAN according to CAN2.0B standard)
• 11x 12Bit A/D converter
• 32 I/O port lines possible
• Watchdog, bus timeout timer
• 2x 10-pin connector for RS232 converter IF232LP
• Performance about 20 times higher compared to Z80 (4MHz)
• Current consumption typical 120mA
• Low power modes
• All neccessary processor bus signals on connector (16Bit data, 20Bit addresses)

Options

• 25MHz, plus 256KB fast RAM, current consumption typical 165 to 185mA
• 2MB RAM
• RTC plus battery