IF485OCRS485 Interface Module, opto-decoupled
Most of our single board computers have one or more IF connectors. For the wiring of the IF connector see table below.
With the IF-Modules IF485LC and IF485OC single board computers may be connected point-to-point or or in a bus-like fashion according to the RS422 or RS485 standard. Full or halfduplex mode is selectable with a jumper. The design of the IF485LC module is low-price trimmed. The IF485OC module is developed for applications requiring galvanic separation.
According to the RS422/RS485 specifications, connections can be up to 1200m in length with transmission rates up to 1MBaud. For details see the RS422 and RS485 specifications.
- Board 31mm x 70mm (including Sub-D)
- RS485, RS422
- Opto-decoupled with DC-DC converter for galvanically separated power supply
- Maximum Baud rate 19200Baud
- 9-pin Sub-D
- Simple 5V supply voltage
Wiring of the 10-pin IF connector:
Pin Function Function Pin 1
*VAT and shipment not included. Quantity discounts on inquiry.
Part Code Details EUR* if485oc RS485 interface module, opto-decoupled
NO LONGER AVAILABLE
61.87 kabel-if 10-pin flat ribbon cable with two connectors 4.45
www.mct.net: Products: Interface Modules