Single Board Computer with LPC2106, 60MHz

LPC2106 goes network

NET2106 was designed - as its name indicates - for network applications. The result is a network capable hardware at reasonable costs and yet offering high performance. The heart of the board is the Philips controller LPC2106, already known from DIL2106. In addition, the following components are on-board: A battery-buffered RTC with temperature sensor and 32 bytes non-volatile RAM, a serial FLASH, and a 12Bit A/D converter with 11 channels.


Via connectors, the hardware is easily extendable (-> BASE2). An ethernet module NM7010A can be plugged into two rows of connectors. This module contains the ethernet controller W3100A, the phyceiver and the RJ45 connector. It has a hardware TCI/IP stack, this greatly simplyfies programming and saves program memory.

NET2106 is also usable in a wireless LAN (WLAN). The NM7010A is then replaced by a combination of NM7001 (ethernet module) and NM6000 (802.11b module).

Of course NET2106 can also be used without the ethernet module.

For software development a C-compiler running under MS-Windows is available.

-> ECO-C-arm Demo version

This compiler is the ARM version of WinECO-C. It is based on GNU GCC and provides libraries and programming tools for the LPC2106. Following the tradition of WinECO-C we offer complete development kits allowing users to start development straight away.

A command line version of the compiler is also available for Pinguin Linux.

! Technical Data


  • Board 58mm x 46mm, multilayer
  • ARM7TDMI-S (LPC2106, Philips)
  • 60MHz clock PLL-adjustable
  • 128KB FLASH-memory (ISP)
  • Serial FLASH up to 1MByte
  • 64KB RAM
  • Two UARTs
  • SPI
  • I2C
  • Max. 30 parallel I/O lines
  • Two timers (32Bit)
  • PWM with 4 channels (resolution min. 16ns)
  • RTC DS1629
  • Watchdog
  • A/D converter TLV2556 12Bit, 11 channels
  • Voltage reference
  • Supply voltage 3.3V (50mA typ., 59mA with IF232, 140mA with NM7010)
  • Connector for ethernet module NM7010A (10/100MB) or 802.11b
  • IF connector for RS232, RS485 etc.
  • Weight only 16 gramms (39 with NM7010A)
  • Temperature range -40 to +85° (0 to 70 with NM7010A)
  • Classified UL, CE, RoHS
  • Cross-C-compiler ECO-C-arm available
-> Manual
-> Assembly
-> Diagram

-> lpc210x_data.pdf
-> lpc210x.pdf

-> Sample programs
-> Download


! Development Kit

For a start we offer a complete development kit:


! Prices

Part Code Details EUR*
net2106-starter-kit NET2106 development kit with C-compiler Demo version 150.00
net2106-profi-kit NET2106 development kit with profi C-compiler 534.00
net2106 NET2106 board 93.00
nm7010a Ethernet module 10/100MB 34.00
batt Battery with solder points 4.00
if232-3.3v RS232 interface module 21.99
base2 BASE2 board (with DC jack, without JTAG connector) 59.20
bl2x16-2.54 Connector 2x16, RM 2.54 0.70
net2106-upgrade Upgrade from starter to profi 384.00
- ECO-C-arm Demo version -
eco-c-arm-linux ECO-C-arm command line version for Linux 99.00
*VAT and shipment not included. Quantity discounts on inquiry. Products: Single Board Computers